Part 1
Introduction
Welcome
Veneering Basics
14 Good Reasons
Vacuum Press Uses
Vacuum Press Options
Overview
Questions & Answers
____________________
Part 2a (Option 1 of 2)
Project: V2 Venturi Press
About Project: V2
Parts List
Build the Manifold
Build the Reservoirs
Assemble the Venturi
Make the Carrier
Wire the Press
Testing and Adjusting
Mods and Options
____________________
Part 2b (Option 2 of 2)
Project: EVS Pump Press
About Project: EVS
Parts List
Pump Selection
Build the Manifold
Build the Sub-Manifold
Build the Reservoirs
Make the Carrier
Final Assembly
Wire the Press
Testing and Adjusting
Mods and Options
____________________
Part 3
Vacuum Bagging
Vacuum Bag Basics
Polyurethane vs. Vinyl
DIY Vacuum Bags (A)
DIY Vacuum Bags (B)
DIY Vacuum Bags (C)
Connect the Bag
Bag Closures
Platens/Cauls
Breather Mesh
Maintenance
DIY Frame Press
____________________
Part 4
Veneer Information
About Veneer
Veneering Myths
Backer Veneer
Veneer Glues
Veneering Tips
Substrate Materials
Flattening Veneers
A Sharp Veneer Saw
Jointing Veneers
Taping Veneers
Dealing with Defects
Curing Glued Panels
Veneering w/o Vacuum
Hammer Veneering
Iron-On Veneering
Veneer Storage
Amazing Bookmatches
Copper Veneer Guide
Paperbacked Veneer
Edgebanding Guide
____________________
Part 5
Miscellaneous Info
Vacuum Forming
Vacuum Chucking
Vacuum Clamping
Vacuum Clamp Matrix
Vacuum Infusing
DIY Vacuum Manifold
JWW Visitors' Vacs
Veneer Quality
Veneering FAQ
Veneer Glue FAQ
The Vac FAQ
Copper Veneer FAQ
Downloads (PDF's)

Disclaimer (Please read thoroughly)
Neither the author, nor Joewoodworker.com or its subsidiary/parent websites and businesses, shall assume any responsibility for any incident, accident, or otherwise in regard to the creation, use or modification of a vacuum press. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy, or fitness for any particular part of the vacuum press instructions or parts. In no event shall the author or Joewoodworker.com or its subsidiary/parent websites and businesses be liable for direct, indirect, special, incidental, or consequential damages arising from any information contained within the vacuum press article. The user/builder/owner of the system shall assume all risk. It is also agreed that the author and Joewoodworker.com and its subsidiary/parent websites and businesses do not provide any form of insurance of fitness of this device for any use: commercial or otherwise. The user/builder/owner shall hold the author and Joewoodworker.com and its subsidiary/parent websites and businesses harmless for any mishap, injury, or untoward occurrence.

The user/builder/operator agrees to indemnify the author and Joewoodworker.com and its subsidiary/parent websites and businesses and save them harmless against any claim for damages, compensation, or otherwise on the part of any person or persons.
Trademarks and product names appearing in the vacuum press article are for identification purpose only, and are property of their respective owners.

Anyone using any of the information collected during a JoeWoodworker.com visit does so at their own risk and they assume complete responsibility for their actions while using this information. Anyone building equipment based on information collected from JoeWoodworker.com and its subsidiary/parent websites and businesses does so at their own risk and assumes complete responsibility for the use of that equipment by themselves or others. JoeWoodworker.com and its subsidiary/parent websites and businesses are not responsible for any personal injuries to the user/builder/owner or others associated with or property damage resulting from building or operating this vacuum press. Maintaining equipment and evaluating its suitability for a specific situation are the sole responsibility of the user/builder/owner and not that of JoeWoodworker.com or its subsidiary/parent websites and businesses. You agree to use the information at your own risk and should use good judgment during its usage at all times. The user/builder/owner of this system is encouraged at all times to work safely within their ability. The contributing authors to this website are not responsible for any mistakes or omissions in the material contained on this site.

Copyright
This vacuum press article at JoeWoodworker.com contains materials protected under copyright laws of the United States of America as well as International Copyright Laws. All rights reserved.

No part of the vacuum press article may be reproduced, transmitted, or transcribed electronically or otherwise without the expressed written permission of JWW Services Inc.

Information presented on JoeWoodworker.com is intended for personal usage only. Any organizations whether they are profit, nonprofit, clubs, charities, web based groups or otherwise must obtain express permission from JWW Services Inc prior to using any material for public demonstration. This includes but is not limited to textual write-up, pictures and video clips. No information from JoeWoodworker.com or products from VeneerSupplies.com shall be incorporated into other products sold for profit or otherwise. In other words, please don't steal my ideas.

Please see full legal statements here.